If you’re asking, can I put a stainless steel pan in the oven, the answer is Yes! Fully clad stainless steel pans are usually designed to move seamlessly from the stovetop to the oven, and are oven-safe to around 500-600°F. The only variables to consider are the composition of knobs and lids when determining if you can put a stainless steel pan in the oven, so it’s a good idea to do your research before buying stainless steel cookware or bakeware.
Summary Box: High-quality stainless steel cookware is designed to be used in ovens, making it a versatile and practical choice.
Why Stainless Steel Withstands Oven Heat
Even the hottest oven is no match for stainless steel, which melts at over 2,500°F. Obviously your kitchen oven will get nowhere even close to that temperature, as residential ovens usually top out at 550°F.
Quality fully clad stainless steel has no coating to degrade at high temperatures and withstands warping much better than single-ply pans.
What Actually Limits Oven Safety
|
COMPONENT |
TYPICAL RISK |
WHAT TO CHECK |
|
Handles and Lid Knobs |
· Plastic handles will melt in the oven · Silicone-wrapped handles are safe to 400-500°F, depending on the brand · Phenolic handles vary in heat resistance · Riveted stainless steel handles are safe to 500°F |
Check the individual manufacturer’s specifications to ensure that the handles are safe in the oven. |
|
Glass Lids |
Tempered glass lids can shatter above 350°F, while stainless steel lids are resistant to about 500°F |
Check if the cookware comes with glass or stainless steel lids, and the specific brand’s recommendations for maximum safe temperature |
|
Aluminum/Copper Cores or Disc Bottoms |
· Fully clad pans with a middle layer of aluminum or copper will resist warping and are usually safe to 550-600°F · Disc bottom pans may have an exterior aluminum pad attached to the bottom which could come loose when exposed to high heat |
Look at the construction of the cookware before purchasing; fully clad pans will last longer and distribute heat more evenly |
|
Coatings |
Nonstick coatings, even on a stainless steel pan, are not safe at temperatures above 480°F. |
Pay attention to manufacturer’s warnings about maximum safe temperatures |
Stainless Steel Oven-Safe Temperatures by Type
So, can stainless steel pans go in the oven? Yes, but there’s no one stainless steel oven-safe temperature, even for fully clad pans. It all depends on the individual brand, so make sure that you check the manufacturer’s guidance.
- Pans that are all stainless steel with no other materials are usually oven-safe to anywhere between 500-800°F, depending on the brand.
- Pans with silicone-wrapped handles can resist heat up to between 400-500°F.
- Tempered glass lids are usually safe only to 350°F, although some brands have a recommendation as high as 400°F.
Are 360 Cookware Stainless Steel Pans Oven-Safe?
Yes, 360 Cookware stainless steel pans are safe to 500°F. This includes the Vapor© Technology lids, as well as the handles. They’re all made from high-quality stainless steel, with a layer of aluminum sandwiched between layers of surgical-grade stainless steel. There is nothing to melt or warp. This means that our pieces can go straight from the stovetop to the oven for a seamless cooking experience.
Stovetop to Oven: When It's Worth It
There are many techniques that involve starting a dish on the stovetop and then moving it to the oven to finish cooking. Let’s look at a few favorites and see how 360 Cookware pans make it easy!
Pan-Seared Steak
The best way to ensure a steak with a perfect outer crust and a juicy, flavorful interior is to pan-sear it and then finish it in a hot oven. And a 360 Cookware 11.5” fry pan gives you lots of room to cook up a delicious steak dinner for two!
A rib eye, New York strip, or sirloin are all great choices for this dish. Whichever cut you choose, pull the steaks out of the refrigerator about an hour before cooking. Salt both sides and let them rest and reach room temperature.
Set the oven to 400°F. Pat the steaks dry and rub them with a drizzle of olive or avocado oil, and any seasoning you’d like to add. Preheat the fry pan over a medium burner until droplets of water dance across the surface rather than evaporate, and lightly coat the pan with oil.
Place the steaks into the pan, and don’t try to move them until the surface has seared and naturally released from the pan. Flip them over and repeat on the other side. Now that you have a nice crust, move the pan into your pre-heated oven.
After 2 minutes for a 1-inch thick steak, or 8 minutes for a 2-inch steak, pull the pan out and test with an instant-read thermometer. At this point your goal is a temperature 5 degrees less than your desired final temperature. For instance, if you want your steak rare, or at 130°F, it’s finished in the oven at 125°F. You then will cover it with a loose tent of aluminum foil for 5 to 10 minutes to rest and let the juices reabsorb before serving. Do not use the pan lid for this step, as it will trap in steam and the steak’s crust will soften.
Frittata
While you could use a fry pan to cook a frittata, the higher sides on our 3.5 Quart Sauté Pan will more easily accommodate our veggie frittata recipe. It’s a simple process: preheat the oven to 375°F, preheat the pan over medium heat, and sauté your vegetables in a splash of olive oil. Pour the eggs beaten with milk over it all, add cheese, and once the edges have started to set, transfer the pan to the oven to finish cooking. It’s then ready to move straight to the table for serving.
Braising
In essence, braising is the slow cooking of meat or vegetables in liquid without boiling. This is especially useful with tougher cuts of meat, as the low and slow heat breaks down the collagen surrounding the muscle fibers, with the end result being tender and luscious. Think pot roast or pulled pork!
You could simply put a piece of meat into an oven-safe pot, add broth and seasonings, and pop it into a slow oven to cook for hours. However, you get superior flavor by searing the meat first, and that’s where using an oven-safe pot like our 6-quart stock pot comes in.
Preheat your oven to 300°F and set your stock pot on a medium burner until the water drops dance across the heated surface. Drizzle your preferred cooking oil, and then briefly sear all sides of your meat. Remove them before proceeding.
Add your chopped aromatics such as onions, celery, and carrots, and any seasonings called for in your recipe. Once they’ve softened, pour in your braising liquid, preferably a rich broth, with possibly some wine to add more depth of flavor. Then return the meat to the pot, cover, and place in the oven for 2 to 3 hours.
Because our stock pot comes with Vapor© Technology, you don’t even have to check it periodically to add more liquid. The tight seal will ensure that your broth will infuse the meat without evaporating.
Roasting Chicken Thighs
Our Stainless Steel Roasting Pan will take care of all stages of cooking our recipe for Lemon Rosemary Chicken & Root Vegetables, and still look good enough to take straight to the table for serving!
Tips For Using Stainless Steel in the Oven
Bear in mind the following tips for using stainless steel cookware in the oven:
-
Preheat gradually and don't move a pan from a cold fridge straight into a hot oven.
-
Handles get hot, so always use mitts. Some cooks drape a towel over the handle as a reminder.
-
Because of the higher temperatures involved, broiling should only be done with stainless steel pans with no other materials
-
Deglazing is an easy technique that will give you the most delicious pan sauce after oven roasting, as well as making clean-up easier.
When Not to Put Stainless Steel in the Oven
Not all stainless steel pans are safe for oven use. Anything with plastic or wooden handles should only be used on the stovetop, as plastic could melt and wood could become charred and damaged.
Be very cautious about using glass lids. Even the best ones are only good to 350°F, and if you don’t know what the rating is on your lids, they may not even be safe at that temperature.
Finally, even a good quality stainless steel pan should not be left empty for long under a broiler.
How To Clean Stainless Steel After Oven Use
Check out how to clean even burnt-on food from stainless steel. Because stainless steel pans don’t have a nonstick coating to worry about, you can get more vigorous in getting off even the most stubborn grease.
You may see a rainbow discoloration even after you’ve thoroughly cleaned your stainless steel pan, but not to worry! It’s completely harmless and easy to get rid of. When stainless steel is exposed to high temperatures, such as in a hot oven, the chromium in the steel may react with oxygen to form chromium oxide on the surface. It’s purely cosmetic, but if it bothers you, all you need is vinegar. Pour some into the pan, let it sit for a minute, and then rinse and wipe. No more rainbow!
FAQ
Can stainless steel go under the broiler?
Stainless steel is safe under the high heat of a broiler. And with 360 Cookware’s 3-ply construction, you won’t have to worry about the pan warping, as the aluminum core will distribute heat evenly across the entire body. However, make sure there’s at least 2 inches clearance between the pan and the flame, and don’t add the pan until the broiler has preheated, which should take about 5 minutes.
Can a stainless steel pot go in the oven?
360 Cookware stainless steel pots that do not have glass lids or plastic or wood handles are safe in the oven to 500°F. This makes it easy to start a dish on the stovetop and then move it to the oven to finish cooking.
Can stainless steel lids go in the oven?
Stainless steel lids are oven-safe if they do not have plastic or wood knobs. However, many stainless steel lids, even with fully clad pans, are single-layer and could warp under high heat. On the other hand, 360 Cookware’s Vapor© technology lids are especially suited to use in the oven, as they are 3-ply with an aluminum core, just like the body of the pan, ensuring even heat distribution from all directions and resistance to warping.
What temperature is stainless steel safe to?
Stainless steel is usually safe to 500°F, although it’s best to check the individual manufacturer’s specifications to ascertain what they recommend.
Will the oven discolor my stainless pan?
When stainless steel is exposed to very high heat, it may develop a rainbow discoloration, but it’s harmless and easy to remove with a quick soak in vinegar.
Can I put a cold stainless pan in a hot oven?
It is not recommended to move a stainless pan directly from the refrigerator to a hot oven. For instance, if you’ve prepared a dish in our Casserole Pan for serving the next day, let it sit out on the counter for 15 minutes before placing it in the pre-heated oven, or set it into a cold oven and then turn on the heat.